2、Principle：Aluminum electrolytic capacitors from the vibration system for the feed material, followed by the feed pan-Dispatch, and mechanical hand-feeding a plastic needle and polarity detection (automatic reversing the stepper motor); done by the mechanical hand materials will be transferred to the conveyor chain fixture on the open, very short-circuit and anti-detection, automatic exclusion by the cylinder open, short, curved legs and anti-polar products. Fixture products from chains charging into the oven heat aging; cooling products back to the discharge conveyor chains fixture on further testing of aging products, did not rule out the ageing products.
Fixture products in the chains on the charge 50 seconds after the leakage current test after the discharge capacity and loss angle test. Test results are: Good, low-volume, high-capacity, the loss angle, the leakage current and the heavy seized goods, goods from the six bad cylinder into the corresponding box material.

Equipment performance:
1.Test system：Automatic testing machine test system, Chinese liquid crystal display, keyboard input to set parameters directly, the operation is simple and practical.
2.Test voltage, test voltage charging voltage and short circuit test methods using an independent set apart to ensure the accuracy of product testing.
3.Aging machine with 20 high-pressure section of the power (low 12) charging the aging process of the capacitor in the charging step is more stable, too fast to avoid an explosion products boost
4.Pulse charging to upgrade the aging effect, shorten the aging time
5.Material handling system adopts imported frequency converter control
6.Aging temperature: 105℃ freely set
7.Dimensions:4500（L）×3100(W) ×2200(H)mm
8.Equipment weight about 1500KG
9.Total power of about 15KW, normal production and operating power ≤ 10KW

Use of environmental conditions:
1.three-phase five-wire AC380V±10% 50Hz15KVA.
2.Compressed air pressure ≥ 3.5Mpa
3.Temperature: room temperature
4.Ange of features to ensure：23±5℃、45-75%RH