TE-2500B Automatic Test Separator
  Equipment opinion
Chain conveyors used automatic transmission, will be measured electrolytic capacitors inserted in the conveyor belt of the activities folder, transshipment to test microcomputer systems, microcomputer from continuous testing parameters and sorting work.
The machine has a wide range of specifications production cost advantages.

Equipment basic parameters
1. Size 2800 (L) x850 (H) X560 (W) mm
2. Weight of about 380 kg
3. Testing and sorting speed (65 pcs / min)
4. Capacitor can be the largest foreign economy and the election: 30 (l consecutive) 35 (separated)
5. Fixture: high-pressure horns / lead a general slow-dedicated fixture

Equipment Performance
1. Electrolytic capacitors short-circuit, leakage current, capacitance, loss of the automatic sorting test
2. Good and bad for automatic counting
3. In the high-voltage charge before automatically exclude short-circuit or adverse aging products

Sorting Test and content
Leakage current (LC)
1. Test voltage: 5 ~ 550 V adjustable
2. Charge current: 2 A
3. Charging time: about 60 cells / minute
4. Charge Resistance: 2 K ohm more than 20 w
5. Leakage settings: 0.1 Ua ~ 2mA
6. Determination deviation: less than 2%

Losses (DF)
1. Said: the loss tangent angle that
2. Test frequency: 120 Hz & 1KHz
3. Test: 0.001 to 0.999 effective digital 3
4. :+(-) Deviation of less than 1%

Capacitance (CP)
1. Testing range: 0.1 to 10,000 uF four effective digital
2. Test frequency: 120 Hz & 1KHz
3. Determination deviation: less than 1%


The use of environmental conditions
1. Single phase AC220V + (-) 10% / 50Hz/0.4KVA power;
2. Need pressure> = 2.5 Mpa compressed air
3. Use of the environment temperature: room temperature
4. Ensures that the scope of: 23 + (-) 5 degrees Celsius ,45-75% RH